black%20wire%20set
Car/Truck Ignition Wire Sets

Ignition wire sets offered by Aurora are OEM replacements. That means they are of the same length and boot configuration as the original equipment on your vehicle. This ensures proper fit and ease of installation. For motor home applications, unless otherwise stated, use the same wire set as for pickup trucks to ensure a proper fit. Motor home engines and chassis are normally one year earlier than the model year of the unit.

If you have made engine modifications such as the addition of headers, an OEM set may not offer the proper clearance. If you have changed distributor cap styles, we can adjust the wires for you. We can easily have a custom set made, usually at no additional cost. Check out the Custom Building page for more information or contact us.

 

Links to the automotive catalogs can be found at the bottom of this page.

 

All Aurora wire sets are 8.5mm diameter and available in either a sharp looking red jacket with white print or a beautiful black jacket with white print. 

 

                                   

Aurora wires are not only different than most in terms of their robust construction but... they feel different too! A feel that can be achieved by using only the highest quality silicone. Unlike the hard rubberized coatings of most wires, Aurora wires are supple and ultra smooth to the touch, offering superior strength yet with complete flexibility. Aurora spares no expense in offering you the best.

Check out the Wire Features page to see why Aurora's are simply the best and most durable ignition wires on the market today!

 

IGNITION WIRE SPECIAL FEATURES

 

  •  A true hybrid wire offering the full electrical noise suppression benefits of carbon core with the performance benefits of metal core.
  • 400 ohms/foot stainless steel conductor.
  • 7-15 times more current flow than carbon core wire.
  • Fully shielded cable to eliminate both radio and computer noise interference.
  • Stainless steel or brass terminals (depending on the application) to eliminate corrosion.
  • Double spring-lock terminals for a snug and positive connection.
  • Terminals air crimped at 1100 psi to resist annoying pull-off.
  • Superior quality high temperature magnetic suppression silicone wire that effectively resists current leakage as well as heat, vibration, moisture and age breakdown.
  • High temperature silicone spark plug boots that resist burning and age deterioration. Rated to 550 deg F.
  • 8.5mm silicone jacket, available in red or black. 
  • Lifetime Limited Warranty
  • EVERY single wire individually bench tested to meet high quality standards.
  • Single leads may be purchased at a later date should a wire be accidently damaged. 
  • Custom fitted for each application to ensure a proper and attractive fit.
  • Enhances current flow from any ignition system for further horsepower, torque and fuel mileage gains.

Did you know that EVERY manufacturer recommends that carbon core be replaced every 2 years or about every 50,000 km (30,000 miles)? Aurora wires NEVER need replacement...never! 

Should you not find what you are looking for, please contact us and we will do our best to help you find the proper set.

Click here for a word or two about VIN codes.

Note: we are in the process of adding images for all our wire sets. If the set you are interested in does not presently have an image, please contact us and we would be pleased to email you one.

 

 

© 2006-2008 Sudden Impact Performance. All rights reserved.

!